衰减荷载作用下饱和软土的固结分析

研究了衰减荷栽作用下软土一维固结问题,建立了小变形固结模型,探讨了荷载衰减规律,分别求解了相应的小变形和大变形固结边值问题;通过理论解答与6块场地实测沉降的比较,表明用考虑荷载衰减的大变形固结理论计算软土一维固结的沉降值与实测结果接近。     

多波束卫星网络的物理层安全性能指标研究

安全性是卫星通信网络充分发挥其优势的必要保证。将物理层安全传输技术引入多波束卫星通信网络,可望有效提高卫星通信系统的抗截获和抗侦测能力。分析了卫星通信的物理层安全应用需求,设计了一套波束成形和功率控制相结合的多波束卫星下行链路物理层安全传输策略,建立了信道模型和信号模型,构建了一套多波束卫星网络下行链路的物理层安全性能评价指标,并对指标进行了定性和定量的分析。     

大功率柔性互联设备的有功互济协调控制方法

针对以常规母联开关互联的交流电网线路变压器容量无法合理利用的问题,提出了依靠由背靠背电压源变流器组成的新型大功率柔性互联装置实现两侧交流电网有功功率互济的协调控制方法。介绍了新型柔性互联装置的拓扑结构与基本的控制原理,为实现两侧线路变压器容量合理的目标制定了一种生成有功功率参考的方法,并基于PSCAD/EMTDC搭建了一套仿真算例,对新型柔性互联装置的基本控制与所提出的有功互济的协调控制方法进行了验证。仿真结果表明,在柔性互联装置采用所提方法时能够实现两侧交流线路的有功功率互济,解决了线路变压器容量无法合理分配的问题。     

弹丸爆炸仿真与破片质量统计软件开发

针对利用试验研究弹丸爆炸过程难度大的问题,采用ANSYS／LS-DYNA有限元软件对弹丸爆炸过程进行了仿真,设计开发了破片质量分布统计软件,再现了弹丸爆炸的宏观过程,并且得到了破片质量分布的定量结果．     

轴向应力对铁磁材料磁极性影响研究

为研究外加应力作用下铁磁材料磁极性变化规律,制作Q235钢轴状静载拉伸试件,在MTS810型液压伺服试验机上进行正向或反向多级加载,采用EMS2003金属磁记忆仪检测拉伸过程试件表面磁记忆信号变化,分析加载顺序、加载次数及应力大小对磁极性影响。研究结果表明：同一加载方向上试件磁极性不变,加载应力大小决定磁极性强弱,正反方向加载试件产生相反的磁极性。同一加载方向、同一加载应力条件下,加载次数不影响磁极性;改变加载方向,加载应力需逆转磁畴结构取向,加载次数增多使磁极性略有增强。     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

新型PBL键外包钢-混凝土组合梁抗弯承载力简化计算

基于理论分析,建立了新型PBL键外包钢-混凝土组合梁抗弯承载力计算的基本假定和计算模型,推导出组合梁抗弯承载力的简化计算公式,并采用有限元分析软件ANSYS14.5对组合梁进行了非线性有限元分析.对比分析表明:新型PBL键外包钢混凝土组合梁抗弯承载力的试验值、简化计算值和模拟分析值吻合较好.     

基于实战化条件下人民防空装备体系管理能力建设

基于实战化条件下人民防空装备体系管理能力建设应着眼国家安全利益拓展,人民防空转型建设需求和完成多样化任务需要,强化顶层设计,搞好储备,坚持信息主导,着眼＂能打仗、打胜仗＂,坚持＂战斗力这个唯一的根本的标准＂,建设与发展相适应的人民防空装备体系管理能力。     

Dual sourcing: Responsive hedging against correlated supply and demand uncertainty

This article analyzes dual sourcing decisions under stochastically dependent supply and demand uncertainty. A manufacturer faces the trade‐off between investing in unreliable but high‐margin offshore supply and in reliable but low‐margin local supply, where the latter allows for production that is responsively contingent on the actual demand and offshore supply conditions. Cost thresholds for both types of supply determine the optimal resource allocation: single offshore sourcing, single responsive sourcing, or dual sourcing. Relying on the concept of concordance orders, we study the effects of correlation between supply and demand uncertainty. Adding offshore supply to the sourcing portfolio becomes more favorable under positive correlation, since offshore supply is likely to satisfy demand when needed. Selecting responsive capacity under correlated supply and demand uncertainty is not as straightforward, yet we establish the managerially relevant conditions under which responsive capacity either gains or loses in importance. Our key results are extended to the broad class of endogenous supply uncertainty developed by Dada et al. [Manufact Serv Operat Mange 9 (2007), 9–32].© 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012